Lincoln Electric Tomahawk® 1000
The new Tomahawk® 1000 plasma cutter from Lincoln Electric is portable enough to use on the jobsite and rugged enough to use on up to one inch material in a production environment.
The Tomahawk® 1000's outstanding features include:
- PowerConnect™ Technology - Automatically senses input voltage, phase and frequency.
- Continuous Output Control - Focus the arc for different material thicknesses.
- Tourch Start™ System - Reliable plasma arc initiation without high frequency.
- Front Panel Purge Control - Makes it easy to set the air flow rate without initiating the plasma arc.
- Cool Operation, Long consumable Life - Money saving electrode and nozzle designs.
>>Tomahawk® 1000 Product Information
Lincoln Electric Tomahawk® 625
Tomahawk® plasma cutting systems are portable enough to carry to any jobsite. Hook up the compressed air, grab the torch and start cutting right away.
Top Features
- Output 40A
- 5/8 in. maximum cut @ 12 ipm
- Rapid Arc Restrike
- Front Panel Purge Control
- Cool Operation, Long Consumable Life
>>Tomahawk® 625 Product Information
Thermal Dynamics Cutmaster A Series
Cutmaster A Series reliability and new automation delivers the best in productivity, precision and performance. Introducing the next generation of innovative Automated Plasma Cutting Systems from Thermal Dynamics®.
Click below for more information or call Torchmate directly at (866)571-1066.
- 60 Amp Plasma Cutting System - Cutmaster A40
- 80 Amp Plasma Cutting System - Cutmaster A60
- 100 Amp Plasma Cutting System - Cutmaster A80
- 120 Amp Plasma Cutting System - Cutmaster A120
Thermal Dynamics Auto Cut
Torchmate partners with Thermal Dynamics to provide you with Flexibility, Value, and Performance.
Auto-Cut 100
Overview
- Precision - Performance - Productivity! Delivers premium cut performance on both mild steel and non-ferrous materials.
- Power Supply Designed for Reliable, Low Cost Operation. Features like the XT-301 consumable parts cartridge and the Machine Status Message Center make the Auto-Cut 100 easy to operate.
- O2 Plasma Cutting. For even better cut quality on mild steel, Auto-Cut 100 offers O2 plasma cutting capability.
- Water Mist Secondary (WMS). For lowest cost non-ferrous cutting and unmatched cut quality, use our unique Water Mist Secondary (WMS) process with Nitrogen plasma and water shield.
- MaximumLife Parts. Maximum performance and life with MaximumLife parts on our XT-301 Torch.
- Full Featured Gas Control GCM-1000! Plasma and secondary pressures and flows precisely controlled at power supply with individual single stage regulators. Changing from the secondary gas to water mist secondary is simple with front panel selector switch.
- Patent Pending XT Torch Technology! Thermal Dynamics" advanced XT Torch Technology brings plasma cutting to new levels of precision and productivity.
- Precision design and construction of the XT-301 torch and cartridge ensure exact relocation of the center-line of the cut after process changes.
- NEW SpeedLok Technology. Rapid engagement threads on retaining collar of keyless cartridge mean easy installation and quick return to production.
Specifications
|
Quick Specifications |
|||||||||
|
Processes |
|
||||||||
|
Amperage Range |
|
||||||||
|
Max. Open Circuit Voltage |
|
||||||||
|
Cut Capacity |
|
||||||||
|
Duty Cycle |
|
||||||||
|
Shield Gas |
|
||||||||
|
Torch |
|
||||||||
|
Plasma Gas |
|
||||||||
|
Automation Type |
|
||||||||
|
Voltage Range |
|
||||||||
|
Certifications |
|
||||||||
|
Input Amps at Rated Output |
|
||||||||
|
Input Power |
|
||||||||
|
General |
|||||||||
|
Included Features |
|
||||||||
Accessories
|
Part No. |
Description |
|
9-9336 |
ASS'Y,TORCH CLAMP 2" TUBE Torch Clamp |
|
3-9111-1 |
Auto-Cut 100 |
|
3-9111-3 |
AUTO-CUT 100, 400V, PS Auto-Cut 100 |
|
3-9111-4 |
AUTO-CUT 100, 400V CE, PS Auto-Cut 100 |
|
3-9111-2 |
AUTO-CUT 100, 460V, PS, CHOP Auto-Cut 100 |
|
3-9111-5 |
AUTO-CUT 100, 600V CSA, PS Auto-Cut 100 |
Auto-Cut 200
Overview
- Precision - Performance - Productivity! Delivers premium cut performance on both mild steel and non-ferrous materials.
- Power Supply Designed for Reliable, Low Cost Operation. Features like the XT-301 consumable parts cartridge and the Machine Status Message Center make the Auto-Cut 200 easy to operate.
- O2 Plasma Cutting. For even better cut quality on mild steel, Auto-Cut 200 offers O2 plasma cutting capability.
- Water Mist Secondary (WMS). For lowest cost non-ferrous cutting and unmatched cut quality, use our unique Water Mist Secondary (WMS) process with Nitrogen plasma and water shield.
- MaximumLife Parts. Maximum performance and life with MaximumLife parts on our XT-301 Torch.
- Full Featured Gas Control GCM-1000! Plasma and secondary pressures and flows precisely controlled at power supply with individual single stage regulators. Changing from the secondary gas to water mist secondary is simple with front panel selector switch.
- Patent Pending XT Torch Technology! Thermal Dynamics" advanced XT Torch Technology brings plasma cutting to new levels of precision and productivity.
- Precision design and construction of the XT-301 torch and cartridge ensure exact relocation of the center-line of the cut after process changes.
- NEW SpeedLok Technology. Rapid engagement threads on retaining collar of keyless cartridge mean easy installation and quick return to production.
Specifications
|
Quick Specifications |
||||||||
|
Processes |
|
|||||||
|
Amperage Range |
|
|||||||
|
Max. Open Circuit Voltage |
|
|||||||
|
Cut Capacity |
|
|||||||
|
Duty Cycle |
|
|||||||
|
Shield Gas |
|
|||||||
|
Torch |
|
|||||||
|
Plasma Gas |
|
|||||||
|
Automation Type |
|
|||||||
|
Voltage Range |
|
|||||||
|
Certifications |
|
|||||||
|
Input Amps at Rated Output |
|
|||||||
|
Input Power |
|
|||||||
|
General |
||||||||
|
Included Features |
|
|||||||
Accessories
|
Part No. |
Description |
|
|
3-9112-1 |
Auto-Cut 200 |
|
|
3-9112-2 |
AUTO-CUT 200, 460V, PS Auto-Cut 200 |
|
|
3-9112-3 |
AUTO-CUT 200, 400V, PS Auto-Cut 200 |
|
|
3-9112-4 |
AUTO-CUT 200, 400V CE, PS Auto-Cut 200 |
|
|
3-9112-5 |
AUTO-CUT 200, 600V CSA, PS Auto-Cut 200 |
|
Auto-Cut 300
Overview
- Excellent Cuts Using Air Plasma.
- Unmatched Cut Quality on Non-ferrous Materials to 1 in. (25mm) Using our Unique Water Mist Secondary System (WMS).
- Fast and Easy Installation.
- Simple Set-up and User-friendly Gas Console.
- Quick-change, Consumable Design.
- Easy to Identify and Troubleshoot Problems.
- Highest Cut Speed in its Class.
- Highest kW Output in its Class.
- Reduced Downtime During Parts Changes Due to the Revolutionary SpeedLok Cartridge Design of the XT-301 Torch.
- Microprocessor Controlled to Produce the Best Cut Quality Every Cut.
- Precision Torch Design for the Best Cut Quality in its Cass.
- Advanced Testing in Lab and Field Trials Ensures Ongoing Performance and Reliability.
- NEW SpeedLok Technology. Rapid engagement threads on retaining collar of keyless cartridge mean easy installation and quick return to production.
Specifications
|
Quick Specifications |
|||||||||||||||
|
Processes |
|
||||||||||||||
|
Amperage Range |
|
||||||||||||||
|
Max. Open Circuit Voltage |
|
||||||||||||||
|
Cut Capacity |
|
||||||||||||||
|
Duty Cycle |
|
||||||||||||||
|
Shield Gas |
|
||||||||||||||
|
Torch |
|
||||||||||||||
|
Plasma Gas |
|
||||||||||||||
|
Automation Type |
|
||||||||||||||
|
Voltage Range |
|
||||||||||||||
|
Input Amps at Rated Output |
|
||||||||||||||
|
Input Power |
|
||||||||||||||
|
General |
|||||||||||||||
|
Included Features |
|
||||||||||||||
Accessories
|
Part No. |
Description |
|
|
3-9130 |
RAS1000, REMOTE ARC STARTER AS Remote Arc Starter Assy |
|
|
3-9113-1 |
Auto-Cut 300 |
|
|
3-9113-2 |
AUTO-CUT 300, 460V, PS Auto-Cut 300 |
|
|
3-9113-3 |
AUTO-CUT 300, 400V, PS Auto-Cut 300 |
|
|
3-9113-4 |
AUTO-CUT 300, 400V CE, PS Auto-Cut 300 |
|
|
3-9113-5 |
AUTO-CUT 300, 600V CSA, PS Auto-Cut 300 |
Thermal Dynamics Ultra Cut
-
Excellent Dross-free Cuts Using Oxygen (O2) Plasma on Mild Steel up to 1/2 in. (12mm). - Unmatched Cut Quality on Non-ferrous Materials to 1/2 in. (12mm) with Ar-H2/N2 or up to 3/4 in. (20mm) Using our Unique Water Mist Secondary (WMS•) System.
- Fast and Easy Installation.
- Simple Set-up and User-friendly Gas Console.
- Quick-change Consumable Design.
- Easy to Identify and Troubleshoot Problems.
- Highest Cut Speed in its Class.
- Best Parts Life in the 100 Amp Class.
- Reduced Downtime During Parts Changes due to the Revolutionary SpeedLok Cartridge Design of the XT-300 Torch.
- Microprocessor Controlled to Produce the Best Cut Quality on Every Cut.
- Fiber Optic Communication Means Less HF Interference.
- Precision Torch Design for the Best Cut Quality in its Class.
- Advanced testing in lab and field trials ensures ongoing performance and reliability.
- NEW SpeedLok Technology. Rapid engagement threads on retaining collar of keyless cartridge mean easy installation and quick return to production.
Ultra-Cut 300 Systems
Ultra-Cut™ 300 systems with the XT-300 torch deliver high definition production capacity of 1.25" (32mm) at 100% duty at up to 300 amps. Material up to 2.5” (38mm) may be cut when starting from the edge of the plate. Ultra-Cut 300 systems use the multi-gas, 100% duty cycle, liquid cooled XT-300 180 degree torch with a 2" (50mm) diameter fiberglass mounting tube. Systems also include the digital GCM-2010 gas control for easy parameter setup and precise delivery of gases. A CNC connection on the rear of the power supply provides access to Start/Stop and "OK to Move". A divided arc voltage signal for controlling a torch height control is also provided. Full arc voltage is available inside the power supply.
Ultra-Cut 400 Systems
The Ultra-Cut® delivers premium precision plasma cutting on mild steel and non-ferrous alloys. For non-ferrous material, select our unique Water Mist Secondary process for best in class cut quality. In addition, the Ultra-Cut systems can also be used for clean, efficient, plasma marking without having to change consumables.
- Excellent Dross-free Cuts Using Oxygen (O2) Plasma on Mild Steel up to 2 in.
- Unmatched Cut Quality on Non-ferrous Materials to 1.5 in. with Ar-H2/N2 or up to 1.75 in. Using our Unique - - Water Mist Secondary (WMS™) System.
- Fast and Easy Installation. Simple Set-up and User-friendly Gas Console. Quick-change Consumable Design.
- Easy to Identify and Troubleshoot Problems.
- Highest Cut Speed in its Class. Best Parts Life in the 400 Amp Class.
- Reduced Downtime During Parts Changes due to the - - Revolutionary SpeedLok Cartridge Design of the XT-300 Torch.
- Microprocessor Controlled to Produce the Best Cut Quality on Every Cut.
- Fiber Optic Communication Means Less HF Interference.
- Precision Torch Design for the Best Cut Quality in its Class.
- Advanced testing in lab and field trials ensures ongoing performance and reliability.
- NEW SpeedLok Technology. Rapid engagement threads on retaining collar of keyless cartridge mean easy installation and quick return to production.
Thermal Dynamics Manual Plasma Cutting Systems
Thermal Dynamics is a world leader that is setting the standard in flexibility, value and performance for advanced plasma cutting equipment. The manual systems cover the full range of plasma cutting applications. Thermal Dynamics Cutmaster True Series have the power of two machines built into one.
Cutmaster 52
The CUTMASTER® 52 is the most powerful and lightest weight 1/2" (12 mm) machine on the market today. The CUTMASTER TRUE™ Series are the only systems that offer the precision of the TRUE Cut Drag Tip Series™. The 60 Amp tip allows the system to drag cut up to 1/4" (6 mm) with ease. Giving the absolute best cut quality possible. This unit cuts through mild, stainless, or aluminum up to 11/8" (30 mm) thick. The CUTMASTER 52 combines power with the well known performance and features of the industry-leading 1Torch ®.
Cutmaster 82
The CUTMASTER® 82 weighs in at a mere 43 lbs. (19.5 kg) almost 50% less than its leading competitor, while still offering superior cutting power. Don’t let the size of this unit fool you, it’s more than capable of cutting 3/4" (20 mm) with a maximum capability of 1½" (40 mm). This unit is equipped with the 1Torch®.
Cutmaster 102
The CUTMASTER® 102 is the fastest cutting 1" (25 mm) machine on the market today. This unit’s light weight compact design combined with multiple voltage selection makes it the most portable and powerful cutting machine available. This unit combined with the 1Torch® has a maximum cut capacity of 1¾" (45 mm). More cut capacity than any other system in its class!
Cutmaster 152
The CUTMASTER® 152 is the heavy weight of hand held cutting systems. This unit comes in a compact-light weight package, but don’t let that fool you. It offers enough cutting power to cut 2" (50 mm) material. This compact unit comes standard with the 1Torch®. Providing you with the well known comfort and reliability famous throughout the industry.
Hypertherm HPR Series
HyPerformance Plasma systems deliver HyDefinition cut quality at half the operating costs. By incorporating Hypertherm’s proven HyDefinition, LongLife, PowerPierce and True Hole technologies, HyPerformance Plasma boosts overall performance, productivity and profitability. The systems offer unmatched process flexibility to cut, bevel and mark metals up to 160 mm (6-1/4") thick.
HyPerformance Plasma XD system upgrades
are available for HPR400XD, HPR260 and HPR130.
Hypertherm HSD
HySpeed Plasma HSD130 is an easy-to-use oxygen plasma system that is more productive and more cost-effective than other metal cutting solutions such as oxyfuel, air plasma, and non-LongLife oxygen plasma systems.
- Virtually dross-free cutting capacity - mild steel 16 mm (5/8")
- Production pierce capacity - mild steel 25 mm (1")
- Maximum cutting capacity (edge start) - mild steel 38 mm (1 1/2")
Hypertherm Powermax
High-performance industrial products for every cutting and gouging need.
- A Powermax plasma system is a versatile tool. Whether in a shop, factory, at home, or in the field, Powermax systems cut and gouge a wide variety of metal types, thicknesses and forms.
- Hypertherm’s Powermax line of products consists of six systems that will help you get your cutting and gouging jobs done faster, easier, more reliably and at lower cost.
